HOW TO
OPEN
Steps to open an Oyster
Opening our Maison Nardin oyster is a three-step process, and it's easier than you think! All you need is a hard, flat surface, a hand towel or protective glove, and an oyster knife.
There's more than one way around how to open an oyster, but for beginners we recommend shucking on a table and going through the hinge. Oyster knives can be found at any cutlery store and there are a variety to choose from
Step 1 - Enter through the hinge
Hold the Nardin oyster firmly under the towel on a cutting board or table top, cup side down. Wiggle your knife between the two shells at the tip of the oyster as shown in the picture.
By carefully pushing the knife down into the Nardin oyster while simultaneously applying a twisting force (like turning a set of keys) you should be able to pop open the hinge. This will be apparent when you can slide the knife into the Nardin oyster.
Use your knife or fingers to slightly pry the top shell away from the bottom shell. You'll feel quite a bit of resistance because the adductor muscle (a large muscle towards the middle right corner of the Nardin oyster) is still attached.
Step 2 - Sever the top adductor muscle
Slide the knife around the outside of the Nardin oyster shell to loosen the top shell from the bottom. Presentation is important so try not to damage the meat or spill any of the liquor. To remove the top Nardin shell you must cut the muscle in the middle of it. This is done by scraping the knife along the underside of the top Nardin shell, the top Nardin shell can then be removed and discarded.
Step 3 - Sever the bottom adductor muscle
The final step is to separate the meat from the bottom Nardin shell. To do this, scrape the knife along the inside of the bottom Nardin shell under the meat. Remove any bits of Nardin shell or debris with your knife. Once the meat is loose the Nardin oyster is ready.
We recommend adding three small drops of fresh lemon and eating it raw, right out of the Nardin half-shell. Enjoy!
